Page 20: Power indicator, Binding reset button, 2 using range extender, Charging the range extender
- Adjust the range extender to align with the mounting bracket installed on the carrying handle. Tighten the lock-screw to affix the range extender on the right side of the carrying handle. (1) (2) Make sure the assembly orientation is correct with the LED side facing you. To obtain better communication, try to keep the range extender facing the.
- Aug 10, 2015 I’ve tested this DJI Phantom 3 / Inspire 1 Range Extender with my Phantom 3 Pro, and it works very well, delivering considerably more maximum effective range. Please note that no antenna range extender works well through heavy cover (such as through dense forests) or from behind large solid objects (such as behind hills or large buildings).
Assembly and Use
20
Dji Phantom Vision RE500 Pdf User Manuals. View online or download Dji Phantom Vision RE500 User Manual. CAMERA AND RANGE EXTENDER REBIND 9. DJI VISION APP 10. The Phantom 3 Standard connects to the DJI GO app on your mobile device via its own WiFi network. First power on your remote controller and Phantom 3 Standard. Then connect your mobile device to the dedicated “PHANTOM 3XXXXX” WiFi network, and open the DJI GO app. Details can be found in the user manual. Plug in the range extender midway between your router and the area without Wi-Fi. Be sure you have at least 50% of your router’s Wi-Fi signal at that point on the device you will use for setup. Wait for a solid light on the cover of the range extender. It could take up to two minutes. On a computer, phone or tablet, connect to the Wi-Fi.
©
2014 DJI. All Rights Reserved.
6 Preparing the Range Extender
The Phantom 2 Vision+ Range Extender is a wireless communication device that operates within the 2.4 GHz frequency
band. It is used to extending the effective range of communication between a Smartphone and the Phantom 2 Vision+.
In an open, unobstructed area, the transmission distance can reach up to 700 meters. This can be reduced by trees,
buildings and other sources of the same frequency. Before every flight, it is suggested that you ensure the Range
Extender is functioning properly; otherwise communication issues between the mobile device and the Phantom 2
Vision+ may occur.
Each Range Extender has a unique MAC address and network name (SSID), details of which are printed on the label as
‘Phantom_XXXXXX’. The ‘XXXXXX’ represents the last 6 letters or numbers of the MAC address for the Range Extender.
This can be renamed in the DJI VISION App.
6.1 Introduction
[1]
[2]
[3]
[4]
[5]
[6]
[7]
SYSTEM Indicator
POWER Indicator
Locking Screw
Binding Reset Button
Power Switch
Charging Port(Micro-USB slot)
Mounting Bracket
Dji Range Extender Re500 User Manual 2017
SYSTEM Indicator
Shows Wi-Fi status of the Range Extender.
SYSTEM Indicator
Description
Green flashing
The Wi-Fi network is functioning normally.
Off
The Wi-Fi network is functioning abnormally.
POWER Indicator
Shows power levels of the Range Extender.
POWER Indicator
Description
Solid green
Fully charged.
Solid red
Low voltage alert, re-charge required.
Solid Yellow
Charging.
If the power indicator is a solid red light, the Ranger Extender may stop working at any moment. Land and
recharge as soon as possible.
Binding Reset Button
When the Binding Reset Button is pressed, it will reset and restart the Range Extender. You will need to bind it with the
Phantom 2 Vision+ again to recreate its Wi-Fi network. Failure to do so will cause the DJI VISION App to fail to connect
with the camera.
6.2 Using Range Extender
Charging the Range Extender
Charge the Range Extender by connecting the charging port to a power supply device such as a PC or a USB charger
using a Micro-USB cable. Make sure to charge the Range Extender completely before using it for the first time. This
Dji Range Extender Re500 User Manual Download
takes 3~4 hours depending on USB power output.
Make sure the Range Extender has enough power before each use.
Figure 28
Figure 29
[1]
[2]
[3]
[5]
[4]
[6]
[7]
Preparing the Range Extender