- Achieve ultra-low emissions and reliable electrical/thermal generation from natural gas, diesel or kerosene fuels, or waste gas. Ultra-low emissions. 65 dBA Certifications. The three natural gas C65 ICHP Capstone MicroTurbines produce more than 80 percent of Davidow Hall's electricity and 100 percent of the building's heating and cooling.
- 410034 Capstone MicroTurbine Installation and Permitting Guidelines. (Recommended clearances in mm/in: Front 1651/65, Side 762/30, Rear 914/36.). Is there a manual shutoff valve and fuel filter installed upstream of the MicroTurbine fuel connection?
- Capstone to deploy fifty C65 microturbines in Australia By TMI Staff & Contributors On September 3, 2014 Capstone Turbine Corporation, manufacturer of microturbine energy systems, recently announced that it has secured an order by Optimal Group for fifty Capstone C65s with integrated heat exchangers to be deployed in Australia.
Highly efficient and reliable microturbines from Capstone Turbine Corp produce low-emission power scalable from 30kW to 5MW. With just one moving part and patented air bearing technology, there’s no need for lubricants or coolants. Fewer parts means less maintenance and longer operating intervals. You get a rugged, set-it-and-forget-it operation to maximize performance and production.
Nominal full power performance at ISO conditions: 59˚F, 14.696 psia, 60% RH; Height dimensions are to the roofline. Exhaust outlet can extend up to 7 inches above the roofline. 410066 Rev C (June 2009) Capstone reserves the right to change or modify, without notice, the design, specifications, and/or contents of this document without incurring any obligation either with respect to equipm ent previously sold or in the process of construction. CAPSTONE TURBINE CORPORATION CAPSTONE C200 MICROTURBINE TECHNICAL REFERENCE.
All Capstone Microturbines operate:
December 2006, St. Joseph Hospital installed a Capstone C65 MicroTurbine ® in a combined heat and power (CHP) application. At its peak, the Capstone unit produces 65kW of electric power and 126kW of thermal power to heat the building, along with 194°F (90°C) hot water for the 153-bed hospital that serves 5,000 patients each year. 65 to 1,000 kW. The values in the table are based on systems con-nected to low pressure (Microturbines typically require an inlet fuel pressure near 75 psig, and most microturbines include an onboard gas compressor to provide the required gas pressure. The net power shown in.
- Continuously or On-Demand
- Stand Alone or Grid Connect
- Individually or Multi-pack
- Run on a variety of fuels:
- Low or High Pressure Natural Gas
- Biogas (landfill, wastewater treatment centers, anaerobic)
Microturbines at Oil and Gas Site
- Flare gas
- Diesel
- Propane
- Kerosene
- Ultra-low emissions
- One moving part – minimal maintenance and downtime
- Patented air bearing – no lubricating oil or coolant required
- Factory Protection Plans available
- Remote monitoring and diagnostic capabilities
- Integrated synchronization and protection
- Reliable – tens of millions of run hours and counting
Combined Heat & Power Products: When installed in Combined Heat & Power (CHP) and Combined Cooling, Heating & Power (CCHP) applications, Capstone Microturbines can exceed 80% energy efficiency whether fueled by natural gas, liquid fuels or renewables.
Oil and Gas Products: Capstone Microturbines average 99% power availability. Low maintenance and compact Capstone Microturbines enable continuous onshore and offshore operations using wellhead gas (economic or flare, sweet, or up to 7% sour wellhead gas).
Capstone’s offshore C30 and C65 models are UL Certified to meet Class 1, Division 2 NFPA 496. A stainless steel package is available for non-hazardous-area placement. Non-hazardous units are UL-certified to meet the new UL220 and UL1741 category for engine generators fueled with raw natural gas.
Referred to as “dry systems,” Capstone Microturbines have one moving part that doesn’t require lubricants or coolants. No liquids and minimal maintenance means more operating hours and more production for producers. Oil and
Natural Gas Microturbines
Liquid Fuel Microturbines
Capstone Microturbine C 65 User Manual Download
Renewable Fuel Microturbines
Other Capstone Products
Questions? Contact Pumps & Service:
Farmington: (505) 327-6138
Capstone Microturbine C 65 User Manual 2017
Albuquerque: (505) 837-1796