Omgvalue

• Keyence Sr 1000 User Manual Pdf File
• Keyence Sr-1000 User Manual Pdf

Page 3: Connecting the usb cable, Sr-1000 sel menu

3

E SR-1000-IM

Connection and Wiring

„

Connecting the control cable and wiring

Models in SR-1000 series by KEYENCE America: Cable, Console, Illumination option, Main unit, Optional parts, Software. Get KEYENCE SR-1000 Series Instruction Manual. Get all KEYENCE manuals! Sign up to create an account Facebook Twitter. By clicking Create Account, you agree to the Company’s. Do not carry the SR-1000 Series by holding its cables. This may cause cable. Get KEYENCE SR-1000 Series Instruction Manual. Get all KEYENCE manuals!

1

Align the protrusion in the cable connector with the notch in the
control port.

2

Tighten the connector screw by turning it clockwise.

3

Connect the wires according to the usage.

z

When the I/O terminals are not used

z

NPN wiring

z

PNP wiring

„

Connecting the Ethernet cable

1

Align the protrusion in the cable connector with the notch in the
Ethernet port and connect the cable to the main unit.

2

Tighten the connector screw by turning it clockwise.
The screw tightening torque should be within the range between 0.8 and
1.0 N·m.

„

Connecting the USB cable

1

Confirm the orientation and insert the connector straight so that it is
not tilted.

Screw tightening torque:
1.5 to 2.0 N·m

SR-1000

SEL

MENU

Brown

24 V

24 VDC

0 V

FG

Blue

Black tube

SR-1000

SEL

MENU

Brown

Load

Pink/
Light blue/White

White and blue

Green/Gray

Black

Blue

Black tube

24 VDC

FG

0 V

OUT COM

IN1 to 2

IN COM

OUT1 to 3

24 V

SR-1000

SEL

MENU

Load

24 VDC

Blue

Black tube

FG

Keyence Sr 1000 User Manual Pdf File

0 V

Black

OUT COM

Green/Gray

IN1 to 2

White and blue IN COM

Pink/
Light blue/White

OUT1 to 3

Brown

24 V

Wire color

Name

Description

Signal

direction

Initial assignment

AWG

Brown

24 V

24 VDC

Input

-

26

Blue

0 V

Power GND

-

-

26

Orange

RXD (RD)

RS-232C Receive

Input

-

28

Yellow

TXD (SD)

RS-232C Send

Output

-

28

Purple

SGND

RS-232C GND

-

-

28

Green

IN1

Input signal 1

Input

Reading start

26

Gray

IN2

Input signal 2

Input

-

28

White and

blue

IN COM

Input common

-

-

28

Pink

OUT1

Output signal 1

Output

Reading OK

28

Light blue

OUT2

Output signal 2

Output

Reading ERROR

28

White

OUT3

Output signal 3

Output

BUSY

28

Black

OUT COM Output common

-

-

28

Black tube

FG

Frame ground

-

-

-

• Be sure to turn power off before attempting to connect or disconnect the

control cable.

• Insert the connector straight so that it is not tilted and then tighten it

securely. Under-tightening can lead to a loose connector due to

vibrations, resulting in poor contact.

* After tightening it as much as possible by hand, tighten it further

approximately 90° - 120° using a tool such as pliers.

• Insulate unused wires individually.

• Be sure to provide Class D ground for the FG wire.

• The shield and FG wires of the control cable and the shield wire of the

Ethernet cable are electrically connected via the main unit housing. Be

sure to provide them with a common ground.

• When connecting the connector, insert it so that it does not tilt, and then

push in and tighten the connector securely. Under-tightening can lead to a

loose connector due to vibrations, resulting in poor contact.

• After tightening it as much as possible by hand, tighten it further

approximately 5° - 10° using a tool such as pliers.

• Do not bend the base of the Ethernet cable connector repeatedly. It may

cause connection failure.

When connecting the connector, insert it straight so it does not tilt.

Otherwise, the connector pin may be damaged.

NOTICE

Screw tightening torque:
0.8 to 1.0 N·m

NOTICE

POWER

USB

ETHER

NET

NOTICE

Keyence Sr-1000 User Manual Pdf

T0175653

To use all available functions on this website, JavaScript must be enabled in your browser.

• English

1. Models

1 - 29 of 29 products listed below

• SR-2000
  1D/2D Code reader

• SR-2000W
  1D/2D Code reader

• SR-H6W
  Setup software AutoID Network Navigator

  • CAD Data

• OP-51580
  USB cable (A: miniB type) 2 m

  • CAD Data

• OP-86941
  USB Cable 5 m

  • CAD Data

• OP-87230
  Ethernet cable (NFPA79 compatible)

• OP-87231
  Ethernet cable (NFPA79 compatible)

• OP-87232
  Ethernet cable (NFPA79 compatible)

• OP-87353
  Control Cable NFPA79 Compatible, 2 m

• OP-87354
  Control Cable NFPA79 Compatible, 5 m

• OP-87355
  Control Cable NFPA79 Compatible, 10 m

• OP-87527
  Control Cable NFPA79 Compatible,With D-Sub 9-pin 2 m

• OP-87528
  Control Cable NFPA79 Compatible,With D-Sub 9-pin 5 m

• OP-87529
  Control Cable NFPA79 Compatible,With D-Sub 9-pin 10 m

• OP-88301
  Ethernet cable (NFPA79-compliant) Right angle connector 2 m

• OP-88302
  Ethernet cable (NFPA79-compliant) Right angle connector 5 m

• OP-88303
  Ethernet cable (NFPA79-compliant) Right angle connector 10 m

• OP-88304
  Control cable (NFPA79-compliant) Right angle connector 2 m

• OP-88305
  Control cable (NFPA79-compliant) Right angle connector 5 m

• OP-88306
  Control cable (NFPA79-compliant) Right angle connector 10 m

• OP-88307
  Control cable (NFPA79-compliant) Right angle connector D-sub 9-pin connector 2 m

• OP-88308
  Control cable (NFPA79-compliant) Right angle connector D-sub 9-pin connector 5 m

• OP-88309
  Control cable (NFPA79-compliant) Right angle connector D-sub 9-pin connector 10 m

• SR-20AL
  Lighting attachment (SR-2000 Series)

• OP-87866
  Mounting bracket

• OP-88002
  Adjustable bracket for SR

• OP-88176
  Polarizing filter (SR-2000 Series Spare)

• OP-88256
  Polarization filter (SR-2000 Series For all lights-ON)

• SR-20AH
  High-resolution lens attachment

KEYENCE CORPORATION OF AMERICA 500 Park Boulevard, Suite 200, Itasca,
IL 60143, U.S.A.
Phone: 1-888-KEYENCE (1-888-539-3623)
E-mail: tech@keyence.com
Career Opportunities: KEYENCE Career Site

Copyright (C) 2019 KEYENCE CORPORATION. All Rights Reserved.